26 ga. or 23/26 ga

P/N 610: Merlin Microseal™ for 26 ga (0.48 mm, 0.019″) or 23/26 ga. tapered cone tip needles
Requires Microseal Nut.

Installation:

1. Prepare instrument for septum change.

2. Remove existing Microseal septum.

3. Press new Microseal septum in place.

4. Tighten Microseal nut finger-tight. Do not over-tighten.

Inlet Pressures: 5 – 100 psi (20 – 690 kPa)
Inlet Temperatures: 50 – 400 °C